NEW – BANSHEE 2.0 ELITE PLATE CARRIER W/ ELITE CUMMERBUND

NEW – BANSHEE 2.0 ELITE PLATE CARRIER W/ ELITE CUMMERBUND

It’s here and for real this time 

The BANSHEE 2.0 ELITE Plate Carrier (AKA Banshee 2.0) is here. This new unique advanced plate carrier was created from feedback and input from customers, military and law enforcement feedback on what they wanted to see on a plate carrier. The Banshee Elite from the feedback and several prototype designs was born. Unparalleled comfort, mobility, and design.

The Shoulders on the BANSHEE ELITE are fully adjustable and padded. Slightly wider than the original banshee the shoulders lay flatter on your body and have a hidden quick release buckle. The shoulders front and back have Hypalon material with 4 slits that are pliable allowing for easy access to the buckles. The bottoms of the Hypalon shoulders are not sewn down allowing for easier routing of comm wires or hydration lines. New Update – The shoulders include a set of our Banshee Ultimate shoulder pads with all Elite carriers.

The front and back of the BANSHEE feature 6 rows of PALS webbing and pile tape for flags and other identifiers. The interior of the front and back carrier on the body side is also comfort padded with 3D mesh sewn in an airflow pattern allowing for heat disbursement. Rifle plates are loaded from the bottom front/back and secured with a hook/loop closure. The drag handle on the BANSHEE ELITE is sewn through and secured down with hook and loop.

The front of the BANSHEE ELITE is feature packed. On the top of the front of the carrier is an Integrated Admin Pouch. The admin pouch area secures closed with hook and loop. This admin area allows for storage of small items, tools, batteries, chem lights etc. On the front of the carrier on each side are 2 vertical nylon sewn strips to accommodate QASM buckles to accommodate chest rigs. The front flat closure stops at the bottom and does not run under allowing for fast easy donning and doffing.

The BANSHEE ELITE plate carrier comes standard with the BANSHEE ELITE Cummerbund that is removable and fully adjustable. The cummerbund has 6 interior pockets (3 each side) that will accommodate .223 5.56 AR Style. Fits all brands of magazines in this caliber. The pockets have adjustable bungee pull tabs. Exterior and Interior of cummerbund have 3 rows of PALS webbing to accept side plates or other pouches.

Staying with the successful concept of the original Banshee this carrier is One Size. Also standard is a secondary nylon strap system with quick release buckles (also removable) if the cummerbund is not needed. The front pocket of the Carrier has a hook and loop kangaroo pocket to allow for accessories and magazines. Accommodates Banshee 2-mag pouch.

NEW UPDATE – The back of the carrier in a separate pocket from the plate pocket opens and can accept a 2-liter hydration bladder. Integrated option to add hydration.

USA Made-Full Berry Compliant – Backed by our No Questions Asked Lifetime Warranty.

Specs:

  • 500D Cordura
  • MULTICAM has matching webbing and loop/Velcro
  • Advanced plate carrier that is feature packed.
  • Extreme versatility with several PALS web attachment points covering the front, back, and shoulders of the vest.
  • Fully adjustable and padded front and back shoulder areas. Padded with 3D mesh.
  • UPDATE – Banshee Ultimate shoulder pads included
  • UPDATE – Separate pocket from the plate pocket opens and can accept a 2-liter hydration bladder
  • Hypalon shoulders with 4 slits for comms/hydration open at bottom
  • Two areas of loop for identifiers
  • Fits over soft body armor/Uniforms
  • Integrated admin pouch
  • Integrated kangaroo pouch
  • Elite Banshee Cummerbund (6 integrated pockets with Hypalon strips inside) PALS webbing interior/exterior
  • Front and Back interior of carrier padded with 3D Mesh sewn with an airflow pattern
  • Integrated nylon vertical strips to accommodate QASM buckles. To add a chest rig if needed.QASM Buckles not included
  • Heavy Duty bar tacking at key stress points
  • Wire, antenna or hydration hose guides
  • Low Profile/ Lightweight
  • Quick Release Buckle secondary securing system
  • Drag Handle lays flat- Secures with Hook and Loop
  • Made in the USA
  • Lifetime Warranty
  • Plate pockets load from the bottom and will accept up to 10×12 Level 3 and 4 ESAPI OR SIMILAR PLATES and Plate Backers
  • Need Level IIIA soft armor – The Banshee Elite fits the Banshee Soft Armor package.
  • USA MADE
  • Lifetime Warranty

BANSHEE PLATE CARRIER – NOW WITH MATCHING MULTICAM WEBBING

Banshee Plate Carrier – NOW with Matching MULTICAM WEBBING

The BANSHEE Rifle Plate Carrier was designed to meet and exceed the needs of Law Enforcement, Military, and Private Military operators. This Ultra lightweight, low profile, high-quality plate carrier has a great load carrying capacity. Designed for protection, utility, mobility in a compact lightweight design.

Ideal gear for Law Enforcement patrol officers for use in High Threat active shooter situations, Multi-Assault Counter Terrorism Action Capabilities (MACTAC) and Counter Terrorism direct actions.

The Los Angeles Police Department (LAPD) recently approved the Banshee PC and it is on their approved gear list. Available/Approved for individual officer purchase.

The Shoulders on the BANSHEE rifle plate carrier are fully adjustable and padded with a new advanced design feature not seen in other rigs. The shoulder areas once adjusted slides into itself and lock in securely with a hidden quick release buckle. The shoulders have 2 rows of PALS webbing with elastic nylon sewn in between the PALS webbing allowing for comms or hydration tubing.

The front and back of the BANSHEE feature 5 rows of PALS webbing and two 2 inch rows of Loop sewn on for flags and other identifiers. The front and back of the panels of the carrier on the body side are also padded. Rifle plates are loaded from the bottom front/back and secured with a hook/loop closure.

The BANSHEE rifle plate carrier comes standard with a removable cummerbund. Cummerbund runs through the carrier, is fully adjustable (one size fits most) and has PALS webbing on the interior and exterior to accept side plates or other pouches. Also standard is a secondary nylon strap system with quick release buckles (also removable) if the cummerbund is not needed. Both Cummerbund and secondary system integrated on all Banshees. The front pocket of the Carrier has a hook and loop kangaroo type pocket to allow for accessories.

Value and features are packed into this plate carrier. USA Made-Full Berry Compliant Plate Carrier

Specs:

  • UPDATE – New Multicam Banshee’s now with matching Multicam webbing
  • 500D Cordura
  • Lightweight Shoulder Pads Included
  • New Color Options
  • Lighter than before
  • The most advanced plate carrier to outperform anything on the market and withstand whatever you throw at it.
  • Extreme versatility with several PALS web attachment points covering the front, back, and shoulders of the vest.
  • Fully adjustable and padded front, back and shoulder areas.
  • Two area of loop for identifiers
  • Fits over soft body armor/Uniforms
  • Heavy Duty bar tacking at key stress points
  • Wire, antenna or hydration hose guides
  • Removable Cummerbund with interior and exterior PALS for side plates-NEW
  • Low Profile/ Lightweight
  • Quick Release Buckle secondary securing system
  • UPDATE – Drag Handle NOW SECURES DOWN WITH LOOP FASTENER
  • Made in the USA
  • Lifetime Warranty
  • Dimensions of the Cummerbund each side that accepts soft armor 17in x 6in
  • Weight of the BANSHEE empty 2lbs 5 oz
  • Will accept up to 10×12 Level 3 and 4 ESAPI OR SIMILAR PLATES and Plate Backers. Currently, the pockets will not accept the XL ESAPI plates.
  • Now approved by the Los Angeles Police Department (L.A.P.D.)- NTOA (NATIONAL TACTICAL OFFICER ASSOCIATION) APPROVED